Bradford White M1-PC-2U6SS 2 Gallon Electric Water Heater Description
Product Description
The Bradford White M1-PC-2U6SS 2 Gallon Electric Water Heater. Ease of
installation makes this Powerful Compact one of the most practical heaters in
the Bradford White line. Perfect for wash station applications for factories,
stores, and offices. In fact, anywhere a small quantity of hot water is needed
in remote locations. Because it uses ordinary 120 Volt current and because its
size is so small, it can be mounted almost anywhere near the outlet fixture,
thus eliminating costly heat loss in long pipe runs. Bradford White M1-PC-2U6SS
2 Gallon Electric Water Heater: - Compact design can be mounted almost anywhere
- under a sink, inside cabinets or hung on a wall (12 1/4"(311mm)H x 9 7/8"
(251mm) dia.) - Non-CFC insulation precast surrounds tank. - Fully automatic
control fast acting surface-mount thermostat for automatic temperature control.
Factory installed (sensitive) manual reset energy cut-off for safety to prevent
overheating. - Direct heat transfer with immersed element transfers heat
directly and efficiently to the water. Screw-in style. - Deep drawn steel tank
with Bradford White Vitraglas® lining. - Protective magnesium anode rod provides
added protection against corrosion for long, trouble free service. - Steel
Jacket with special coating that inhibits rust and corrosion. - Ideal
application anywhere remote hot water is needed. - T&P relief valve opening
special taping on top of tank. Bradford White M1-PC-2U6SS 2 Gallon Electric
Water Heater Specifications: - 7 GPH recovery @ 50C/ 90F Rise - 2 gallon tank
capacity - Wired for 120 volt service - 1500 watt element - Precast non-CFC
insulation - 4 ft. (1.2 meters) cord with 3 prong grounded plug - 20 AMP circuit
required - All water connections, 3/4" NPT - T&P connection, 3/4" NPT female *
Manufacturer's start up procedures must be observed. Local plumbing, electrical
and mechanical code sets precedence for the installation of a water heater. |
