Eemax EX55T "Thermostatic" Electric Tankless Water Heater Description
Product Description
The Eemax EX55T "Thermostatic" Electric Tankless Water Heater. To serve as a
booster, eliminating long pipe runs, boosters for dishwashers and sanitation.
Applications where precise temperature control is essential such as schools,
hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for
emergency eyewash. Anti-scald protection. Recommended for hot or cold water
feed, microprocessor temperature control for accurate temperature. Fitted with
1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7
GPM, max 2 GPM. Specifications: • Volts 240V • KW 5.5kW • Amps 23A • Rise at 0.5
GPM 75°F • Rise at 0.75 GPM 50°F • Rise at 1.0 GPM 38°F • Rise at 1.5 GPM 25°F •
Wire Size AWG 10 • Dimensions 10.75" x 5.25" x 2.125" • Weight 3 lbs • Element -
Replaceable cartridge insert • Connections: 1/2" compression Eemax EX55T
"Thermostatic" Electric Tankless Water Heater Thermostat Accuracy: •
Thermostatic board maintains +/-0.5°F accuracy. • Achieves full, pre-selected
outlet temperature within 10 seconds after activation. • Maintains consistent
temperature. * Units can be used at 208V with 25% reduced output. * The voltage,
amperage, and circuit breaker specifications must be met for this heater to
function. Please make sure all requirements are met before purchasing this
heater. Manufacturer's start up procedures must be observed. |
