Stiebel Eltron DHC-E 10 Electric Tankless Water Heater Description
Product Description
Stiebel Eltron DHC-E 10 Electric Tankless Water Heater The Stiebel Eltron DHC-E
10 Electric Tankless Water Heater. Control temperature simply by setting a dial
. Set the knob on the front cover and enjoy water temperatures between 86°F
(30°C) and 125°F (52°C). Change the desired temperature at anytime. No purchase
of a remote selector control is necessary. Advanced microprocessor technology
ensures that the water temperature never deviates from the set point. No
scalding. The electronic control system in the DHC-E does not allow the water
temperature to go above 125°F (52°C), which eliminates the possibility that
scalding may occur. On the other hand, 125°F (52°C) water is sufficiently hot
for most uses. Simple design of plumbing system. There is no need for a T & P
valve, drain or mixing valve. The design of the hot water plumbing system gets
very simple and straight forward due to the advances introduced with the DHC-E.
Superior, reliable performance. The DHC-E has two temperature sensors and one
flow sensor which feed their readings into the unit's proprietary microprocessor
control. Three heating elements are engaged in stages, achieving the temperature
you desire. The DHC-E continually monitors the water temperature it produces.
DHC-E Tankless Electric Water Heaters deliver instant hot water. Stiebel Eltron
DHC-E 10 Electric Tankless Water Heater Specifications: • Phase 1, 208/240 V,
7.2/9.6 KiloWatts, 35/40V • Min. required circuit breaker size is 40/50 Amps •
Recommended wire size is AWG Copper 8 • Maximum temperature increase above
ambient water temp. is 65 /87 @ 0.75 GPM, 49 /65 @ 1.00 GPM, or 33 /44 @ 1.50
GPM. • Minimum Water flow to activate unit is 0.45 GPM/1.7 l/min. • Pressure
loss in unit is 1.46 PSI/0.1 bar • Working pressure is 150 PSI/10 bar • Water
connections 1/2" NPT |
