Stiebel Eltron DHC-E 8 Electric Tankless Water Heater Description
Product Description
Stiebel Eltron DHC-E 8 Electric Tankless Water Heater The Stiebel Eltron DHC-E 8
Electric Tankless Water Heater. Control temperature simply by setting a dial .
Set the knob on the front cover and enjoy water temperatures between 86°F (30°C)
and 125°F (52°C). Change the desired temperature at anytime. No purchase of a
remote selector control is necessary. Advanced microprocessor technology ensures
that the water temperature never deviates from the set point. No scalding. The
electronic control system in the DHC-E does not allow the water temperature to
go above 125°F (52°C), which eliminates the possibility that scalding may occur.
On the other hand, 125°F (52°C) water is sufficiently hot for most uses. Simple
design of plumbing system. There is no need for a T & P valve, drain or mixing
valve. The design of the hot water plumbing system gets very simple and straight
forward due to the advances introduced with the DHC-E. Superior, reliable
performance. The DHC-E has two temperature sensors and one flow sensor which
feed their readings into the unit's proprietary microprocessor control. Three
heating elements are engaged in stages, achieving the temperature you desire.
The DHC-E continually monitors the water temperature it produces. DHC-E Tankless
Electric Water Heaters deliver instant hot water. Stiebel Eltron DHC-E 8
Electric Tankless Water Heater Specifications: • Phase 1, 208/240 V, 5.4/7.2
KiloWatts, 26/30V • Min. required circuit breaker size is 30/40 Amps •
Recommended wire size is AWG Copper 10/8 • Maximum temperature increase above
ambient water temp. is 49 /65 @ 0.75 GPM, 37 /49 @ 1.00 GPM, or 25 /33 @ 1.50
GPM. • Minimum Water flow to activate unit is 0.45 GPM/1.7 l/min. • Pressure
loss in unit is 1.46 PSI/0.1 bar • Working pressure is 150 PSI/10 bar • Water
connections 1/2" NPT |
